Alat dan Mesin Pengolahan Limbah

Single Burner Incinerator Portable Incinerator, No Scrubber Cap. 0.01 m3/hour

Single Burner Incinerator Portable Incinerator, No Scrubber Cap. : 0.01 m3/hour

Type of Waste : Laboratory Waste / Medical Waste

Incinerator Capacity : 0.01 m3/hour
Incinerator Type : Single Chamber
Operation Time : 8 hour/day
Chamber Volume : – 1st Chamber 0.024 m³
Incinerator Dimension (Outter ) : L0.47 x W0.32 x H1.67 m
Burner: 1st Burner 5 – 10 liter / hour, Light Oil Burner, Qty : 1 unit
Chamber Temperature : Chamber ±900°C
Chamber Pressure : Negatif (Under Atmosferic Pressure)
Exaust Stack
– Diameter : 4 inchi
– Height : ± 2 m.from ground level
– Coating : High Temp.Paint
Refractory Construction :
– Fire Brick : Fire Brick SK 32
– Castable : CAJ-12
Chamber Insulation
– 1st Wall : Fire Brick, SK-32
– 2nd Wall : Ceramic Fibre, 128 kg/m³
– Bottom : Insulating Brick
Shell & Structure Material Chamber :
– Shell Plate t.3 mm ,Mild Steel
– Joint Flange t.10 mm
– Burner Port t.8 mm
– Structure UNP 80 &
– Coating : Epoxy Paint
FDF Blower : Sentrifugal ,2500 CMH, 220/50,2800 rpm, 1 unit
Electric Power Requirement : 3 kW. 380 V. 3 PH
Fuel : Diesel Oil ( Solar )
Fuel Consumption : Max.10 liter / hour
Fuel Tank :
– Cap. 10 ltr
– Material Tank : Mild Steel plate t. 3 mm
– Level Control
– Drain Port
Control System :
– ELC
– Temperature Control : Digital
– Thermocouple : Type – K.
– Limit Switch
Ash : 5 – 10 % waste weight
Ash Discharging : Manual
Feeding System : Manual
Warranty Term : Six month ( Service)
Operator Requirement : 1 Person
Area Requirement : 2 x 3 m


Portable Incinerator Cap. 1 to 3.75 kg/jam (30 Kg/hari) with Scrubber or w/o Scrubber

Portable Incinerator Cap. : 1 to 3.75 kg/jam (30 Kg/hari) with Scrubber or w/o Scrubber

Type of Waste : Laboratory Waste / Medical Waste
Portable Single Burner Incinerator without Burner 3.75 kg/hour
Portable Single Burner Incinerator without Burner with Scrubber
Operating time : 8 hour /day

Dimension :
Chamber Dimension : 35 x 35 x 41 cm
Chamber Volume : 0.017 m3 (3.75 kg/jam)
Incinerator Body dimension : LxWxH :50 x 50 x 60 cm

Burner : 4-6 liter /jam, Light Oil Burner 1 unit
Chamber Temperature : ± 600 to 800 Deg C
Chamber Pressure : Negatif

Exhaust Stack Dia 250/150 mm, height 2 m , with high temp coating

Refractory Construction :
For Bottom floor ; Fire Clay Brick and Fire Brick
For Shell Plate ; Ceramic Fiber and Fire Brick
For Roof, Burner Port, Door and Nozzle ; Castable

Body Construction :
For Bottom, Shell and Roof Material from Mild Steel thk 3mm
For Joint Flange 10 mm thickness
For Structure Material : Shape and Mild Steel
Coating : Epoxy Coating

Air Blower 2″, 220 Volt, 50/60 Hz, 150 Watt

Optional : Water Scrubber : Pump, Piping with Water Tank
Maximum Capacity 190 liter/min
Electricity 220 Volt, 50 Hz, 1 Phase, 370 Watt

Diesel Oil Consumption : ± 4 liter / hour

Diesel Oil Tank Capacity : 40 Liter

Control System :
– Electronic Control Panle
– Temperature Control : Digital
– Thermocouple : Type – K.

Power Requirement : 1.3 kW / 220 Volt / 1phase / 50Hz

Ash : 5 – 10 % waste weight
Ash Discharging : Manual
Feeding System : Manual
Warranty Term : Six month ( Service)
Operator Requirement : 1 Person
Area Requirement : 2 x 3 m


Single Burner Incinerator Cap. 5 to 9 kg/jam (70 kg/hari) c/w scrubber

Single Burner Incinerator Cap. : 5 to 9 kg/jam (70 kg/hari) c/w scrubber

Type of Waste : Laboratory Waste / Medical Waste
Single Burner Incinerator without Burner cap 5 to 9 kg/hour
Operating time : 8 hour /day

Dimension :
Chamber Dimension : 50 x 50 x 80 cm
Chamber Volume : 0.2 m3 ( 9 kg/hour)
Incinerator Body dimension : LxWxH :80 x 80 x 100 cm

Burner : 4-6 liter /jam, Light Oil Burner 1 unit
Chamber Temperature : ± 600 to 800 Deg C
Chamber Pressure : Negatif

Exhaust Stack Dia 250/150 mm, height 3 m , with high temp coating

Refractory Construction :
For Bottom floor ; Fire Clay Brick and Fire Brick
For Shell Plate ; Ceramic Fiber and Fire Brick
For Roof, Burner Port, Door and Nozzle ; Castable

Body Construction :
For Bottom, Shell and Roof Material from Mild Steel thk 3mm
For Joint Flange 10 mm thickness
For Structure Material : Shape and Mild Steel
For Lifter Padeyes thk 12mm
Coating : Epoxy Coating

Air Blower 2.5″, 220 Volt, 50/60 Hz, 260 Watt

Water Scrubber : Pump, Piping with Water Tank
Maximum Capacity 190 liter/min
Electricity 220 Volt, 50 Hz, 1 Phase, 370 Watt

Control System :
– Electronic Control Panel
– Temperature Control : Digital
– Thermocouple : Type – K.

Power Requirement : 1.3 kW / 220 Volt / 1phase / 50Hz

Ash : 5 – 10 % waste weight
Ash Discharging : Manual
Feeding System : Manual
Warranty Term : Six month ( Service)
Operator Requirement : 1 Person
Area Requirement : 3 x 3 m

Emission Quality According to Government Regulation for the
following :
– Smokeless
– CO < 100 mg/Nm3
– NO2 < 300 mg/Nm3
– Opacity < 10%
Total Empty Weight ± 830 kg


Single Burner Incinerator Cap. 10 to 15 kg/jam (120 kg/hari) c/w scrubber

Single Burner Incinerator Cap. 10 to 15 kg/jam (120 kg/hari) c/w scrubber

Type of Waste : Laboratory Waste / Medical Waste
Single Burner Incinerator without Burner cap 10 to 15 kg/hour
Operating time : 8 hour /day

Dimension :
Chamber Dimension : minimum 63 x 64 x 80 cm
Chamber Volume : 0.32 m3 ( 10 to 15 kg/hour)
Incinerator Body dimension : LxWxH : 100 x 90 x 110 cm

Oil Burner : 5 – 10 liter /jam, Light Oil Burner 1 unit
Chamber Temperature : ± 600 to 800 Deg C
Chamber Pressure : Negatif

Exhaust Stack Dia 250/200 mm, height 4 m , with high temp coating

Refractory Construction :
For Bottom floor ; Fire Clay Brick and Fire Brick
For Shell Plate ; Ceramic Fiber and Fire Brick
For Roof, Burner Port, Door and Nozzle ; Castable

Body Construction :
For Bottom, Shell and Roof Material from Mild Steel thk 3mm
For Joint Flange 10 mm thickness
For Structure Material : Shape and Mild Steel
For Lifter Padeyes thk 12mm
Coating : Epoxy Coating

Air Blower 2.5″, 220 Volt, 50/60 Hz, 260 Watt

Water Scrubber : Pump, Piping with Water Tank
Maximum Capacity 190 liter/min
Electricity 220 Volt, 50 Hz, 1 Phase, 370 Watt

Power Requirement : 1.3 kW / 220 Volt / 1phase / 50Hz

Control System :
– Electronic Control Panel
– Temperature Control : Digital
– Thermocouple : Type – K.

Ash : 5 – 10 % waste weight
Ash Discharging : Manual
Feeding System : Manual
Warranty Term : Six month ( Service)
Operator Requirement : 1 Person
Area Requirement : 3.2 x 3.2 m

Emission Quality According to Government Regulation for the
following :
– Smokeless
– CO < 100 mg/Nm3
– NO2 < 300 mg/Nm3
– Opacity < 10%
Total Empty Weight ± 1,280 kg


Single Burner Incinerator Cap. 17 to 25 kg/jam (200 kg/hari) c/w scrubber

Single Burner Incinerator Cap. 17 to 25 kg/jam (200 kg/hari) c/w scrubber

Type of Waste : Laboratory Waste / Medical Waste
Single Burner Incinerator without Burner cap 17 to 25 kg/hour
Operating time : 8 hour /day

Dimension :
Chamber Dimension : 80 x 80 x 90 cm
Chamber Volume : 0.58 m3 ( 17 to 25 kg/hour)
Incinerator Body dimension : LxWxH : 100 x 100 x 120 cm

Oil Burner : 5 – 12 liter /jam, Light Oil Burner 1 unit
Chamber Temperature : ± 600 to 800 Deg C
Chamber Pressure : Negatif

Exhaust Stack Dia 250/200 mm, height 4 m , with high temp coating

Refractory Construction :
For Bottom floor ; Fire Clay Brick and Fire Brick
For Shell Plate ; Ceramic Fiber and Fire Brick
For Roof, Burner Port, Door and Nozzle ; Castable

Body Construction :
For Bottom, Shell and Roof Material from Mild Steel thk 3mm
For Joint Flange 10 mm thickness
For Structure Material : Shape and Mild Steel
For Lifter Padeyes thk 12mm
Coating : Epoxy Coating

Air Blower 2.5″, 220 Volt, 50/60 Hz, 260 Watt

Water Scrubber : Pump, Piping with Water Tank
Maximum Capacity 190 liter/min
Electricity 220 Volt, 50 Hz, 1 Phase, 370 Watt

Power Requirement : 1.3 kW / 220 Volt / 1phase / 50Hz

Control System :
– Electronic Control Panel
– Temperature Control : Digital
– Thermocouple : Type – K.

Ash : 5 – 10 % waste weight
Ash Discharging : Manual
Feeding System : Manual
Warranty Term : Six month ( Service)
Operator Requirement : 1 Person
Area Requirement : 3.5 x 3.5 m

Emission Quality According to Government Regulation for the
following :
– Smokeless
– CO < 100 mg/Nm3
– NO2 < 300 mg/Nm3
– Opacity < 10%
Total Empty Weight ± 1,360 kg


Incinerator tidak bisa menghanguskan batang besi jarum suntik, karena titik lebur besi lebih dari 1500 DegC
Demi keselamatan kerja dari bahaya tertusuk jarum suntik maka diperlukan alat penghancur jarum tersebut
Setelah jarum suntik dihancurkan maka selanjutnya dibakar kedalam Incinerator

Alat Penghancur Jarum Suntik bagian metalnya

Alat Penghancur Jarum Suntik bagian metalnya

Alat Penghancur Jarum Suntik Bagian Metalnya
– Body terbuat dari Stainless.
– Proses penghancuran jarum sangat mudah.
– Energy listrik sangat kecil max 120 Watt
– Penampungan serbuk jarum sekitar 3000 jarum
– Sangat efektif memusnahkan jarum
– Suhu > 1500ºC bekas jarum jadi sterill
– Spesifikasi jarum
a. Ukuran Panjang Jarum : 12,5 ~ 50 cm
b. Diameter Jarum : 0.5 mm ~ 1mm
– Temperature Bakar : > 1500ºC
– Waktu bakar : 10 detik
– Kapasitas Pembuangan Sampah : 3000 jarum
– Konsumsi Daya Listrik : 0.8 kWH / 10,000 Jarum
– Catu Daya : 200~240 Volt
– Suhu Operasi : 10~60ºC
– Dimensi ± 205 x 165 x 100 mm3
– Berat ± 3.5 kg

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *