Peralatan Laboratorium Teknik Sipil

Abney Level

Abney levelSpesifikasi :
CSTBerger Abney Level
Radius 90 Deg kedua sisi
Bacaan Vernier sampai 10 menit
Persentase scale grade dari 0% sampai 100%
Ukuran : 5-1/4″ Panjang


Auto Level

Auto levelMAIN FEATURES
Objective Dia: 42mm.
Pembesaran: 32x.
Acc. : Double Level Run: ±0.7mm/km
Alat terdiri dari : Main Unit  Autolevel, Tripod, dan Rambu Ukur 5 m


Bor Tangan

Bor tanganAMS Eijkelkamp Edelman Thread-On Auger, Combination, 2-3/4” Dia
The vaulted design of these augers promotes soil digging and ensures a firm hold on the sample in the auger. Soil samples are guided into the auger body by two vaulted vertical cutting blades. The drilling bits are made from untreated steel to guard against contamination of collected soil samples. The augers feature 5/8” thread-on connections. Use the Coarse Sand Auger in very non-cohesive, dry, sandy soils. The Combination Auger is ideal for use in a variety of soils because it provides a secure hold on sandy material and allows for easy removal of more cohesive mud and clay soils from the auger body. Use the Stony Soil Auger in soils with significant gravel content.


Geolistrik

GeolistrikNaniura NRD 300 HF
Untuk mengetahui kandungan mineral, air, batuan dalam tanah

Transmitter:
Power supply DC in : 12 Volt, min. 6 AH (Max. power : used battery accu )
Power Output : 300 Watt for > 20 A
Output Voltage : 500 V maximum ; Output Current : 2000 mA maximum
Current accuracy : 1 mA ; Reading Type : Digital
Power for Digital Meter : 9 Volt, dry battery
Reading Facility : Current loop indicator
Receiver:
Input Impedency : 10 M-ohm
Range : 0.1 mV up to 500 Volt
Accuracy : 0.1 mVolt
Compensator Smooth : 1 x turn (wire wound resistor)
Compensator Rough : 10 x turn (precision multi Turn potensiometer)
Reading : Digital (auto range)
Reading Facility : HOLD (data memory)
Compesator
Transmitter : 1 unit
Receiver : 1 unit
Current Cable @500 meter : 2 roll
Electrode Potential (copper) : 2 pcs
Current Electrode (Stainless) : 2 pcs
Accu 12 Volt, 12 Ampere : 1 unit
Potential Cable 2 x 100 meter
Cable Connector
User Manual Book


Portable Area Meter

Portable area meterAlat Ukur Luas Lahan
Application: can test farmland, green land, forest, water area, tidelands and so on regular and irregular area.
Range: 500-9,999,999 m²
Range 0-999,999.9 m
Test unit: meter, square meter & Chinese acre
Stored datum: 200 Groups
RS-232 link with computer by software
Battery: 6V


Soil Color Book

Soil color bookMunsell Soil Color Book
This revised edition features the same colors available in previous books plus additional color charts.
Included are a 10Y and 5GY soil chart for glauconite soils, a 5R soil chart for Australia and Southeast Asia, and a 7.5R soil chart for tropical and semi-tropical soils.
A Munsell high value, low chroma “white” page shows half steps from 8.5 to 9.5 in value with chromas of 1 and 2 for N, 7.5YR, 10YR, and 2.5Y.
Use this page to describe carbonate, silica, gypsum, and soluble salt precipitates and evaporites common to arid and semi-arid environments as well as very light-colored parent materials such as diatomaceous earth and volcanic ash.
The book’s light gray pages decrease sun glare. The color chips are recessed into each water-resistant page to allow dirt and debris to be wiped off easily with less effect on the color chips.
Chart Size: 6” x 8”.


Bor Tanah Kedalaman 10 meter

Bor tanah kedalaman 10 meterDrilling Rod, Solid bar, 1mtr length, 1 1/4″ dia 10 Pcs
A
uger Head, Welded steel, two radial blades, 4″ dia 1 Pc
Straight Chopping Auger Steel bar,hardened tip, 45 mm width 1 Pc
T-Piece Welded steel 1 Pc
Tube Adaptor, Machined steel, with 3 clamping bolts 1Pc
Turning Rod, Machined steel, 1 1/4″ dia, 60 cm length 2Pcs
Sampling Tube, 68 mm dia, 40 cm length with 3 bolt holes 10 Pcs
Rod Head, Hardened, machined steel, 2 1/2″ dia 1 Pc
Allen Key, Hardened Steel, 1/4″ 1 Pc
Pipe Wrench, 24″ length 2 Pcs
Hammer5 kg weight, 1 Pc
Steel Wire Brush, Wooden Handle 1 Pc


Hand Bor ( Soil Sampling Apparatus )

Hand bor soil sampling apparatusDrilling for soil sampling preparation
Drilling Rod : Solid bar, 1 m length, 1 1/4″ diawan Type Auger : Welded steel, two radial blades, 4″ dia
Straight Choping Auger : Steel bar, hardened tip, 45 mm width
T-Piece : Welded steel
Tube Adaptor : Machine steel, with 3 clamping bolts
Turning Rod : Machine steel, 1 1/4″ dia, 60 cm length
Sampling Tube : 68 mm dia, 40 cm length, with 3 bolt holes
Rod Head : Hardened, machined steel, 2 1/2″ dia
Parafin : Parafin
Vertical Guide : Machine Steel
Allen Key : Hardened steel, 1/4”
Pipe Wrench : 24″ Wrench
Hammer : Steel, 5 kg weight, wooden handle
Steel Wire Brush : Wooden handle, for cleaning laboratory/field apparatus
Dimension (l x w x h) : 105 x 60 x 60 cm/ Gross weight : 130 Kg
Standard supply with instruction manual books


Alat Pembagi Sample Tanah

Alat pembagi sample tanahSoil devider:
Alat pembagi sample tanah menjadi dua bagian yang sama.

 


Sample Extruder

Sample extruderFor extruding soil speciment from 68 mm dia sampling tube (hand boring part SO- 117), welded steel, screw type.
Supplied without sampling tube.
Standard supply with instruction manual operating
Dimension (l x w x h) : 125 x 15 x 25 Cm
Gross weight : 45 Kg


Standard Penetration Test

Standard penetration testASTM D-1586 /  AASHTO T-206
For driving a split barrel sampler to obtain a representative soil sample and measure the soil resistance to penetration.
Consist of :
Split Barrel Sampler : Hardened machined steel, 1 3/8″ I.d; 18″ length
Sampling Rod : Steel pipe, 44 mm (1 3/4″) diameter, 1.5 m length
Drive weight Assembly Consist of :
Hammer : Steel, 63.5 kg weight, 8″ diameter, 240 mm height
Anvil : Machine steel, 6″ diameter, 150 mm height
Guide Rod : Steel, 76.2 cm drop height
Tripod Assembly Consist of :
Tripod Stand : Steel pipe 71 mm dia # 2.5 mm, 6 metre standing
Pulley : 20 cm diameter
Rope : Manila rope, 3/4 diameter x 15 metre
Vertical Guide : Machine steel, 160 mm dia, 45 mm hole dia
Pipe Wrench : 24” length
Dimension (l x w x h) : 330 x 60 x 60 Cm/ Gross weight : 445 Kg


Electric Sample Extruder

Electric sample extruderFor extruding soil speciment from 68 mm dia sampling tube (hand boring part SO- 117), electric, 220 Volt, 750 Watt, 1 Phase.

Supplied without sampling tube
Standard supply with instruction manual operating
Dimension (l x w x h) : 40x50x130 Cm
Gross weight : 60 Kg


Corps of Engineer Soil Surface Sampler (ASTM D-2937)

Corps of Engineer Soil Surface Sampler (ASTM D-2937)For determining soil density in place
Consist of :

Hammer :
– Machine steel, plated, 10 lbs
– sliding weight : 27 1/4″ falling height

Sampling Tube :
– Machine steel, plated, 3″ o.d,
– 2-7/8″ i.d., 2-13/16″ length
– Standard supply with instruction manual operating
– Dimension(l x w x h) :25x25x100 cm
– Gross Weight : 35 kg


Dutch Cone Penetrometer/ Sondir 5 Ton Capacity (ASTM D-3441 / SNI 2827-2008)

DUTCH CONE PENETROMETER / Sondir 5 Ton Capacity (ASTM D-3441 / SNI 2827-2008)For determining cone resistance and friction resistance of soil layers
Consist of :

Press-In Apparatus : Steel construction, manually operated 5 tons capacity.
Sounding Rod : Machined steel, 36 mm o.d., 1 mtr effective length, tappered thread.
Plunger Rod : Round bar, 15 mm dia, 1 mtr length
Adaptor :
Push Adaptor Machined steel.
Pull Adaptor Machined steel.
Spiral Anchor
Spiral Anchor : Machined steel, welded 1.5 m length
Handle And T-piece : Machined steel, welded
Mantel Cone : Precision machine steel hardened tip, tappered thread 60º angle, 35.7 mm diameter
Friction Cone : Precision machine steel hardened, with friction jacket, tappered thread 60º angle, 35.7 mm diameter.
Wrenches Set : Pipe wrench (2), adjustable wrench (1), spanner wrench (1) 1 set allen key (1), screw driver (1), oil can (1), steel brush (1), piston wrench (1), seals tape (2), oil seals

(2), steel box (1).
Fasten press Long Fasten Press Short Fasten Press
Manometer
Fasten press : Beam Cannal
Long Fasten Press : 1.8 m length, 12 cm width
Short Fasten Press : 1.2 m length, 15 cm width
Manometer : 60 kg/ cm² cap, single pointer, 6″ dia, lower
mount connection (Calibration and certified KAN LK-011-IDN)
Manometer : 500 kg/ cm² cap, single pointer, 6″ dia, lower mount connection (Calibration and certified KAN LK-011-IDN)
Dimension (l x w x h): 220 x 120 x 80 cm/ Gross weight: 500 kgStandard supply with instruction manual books


Hydraulic Cone Penetrometer / Sondir Hidrolik 5 Ton Capacity

HYDRAULIC CONE PENETROMETER / Sondir Hidrolik 5 Ton CapacityASTM D-3441 / SNI 2827-2008
For determining cone resistance and friction resistance of soil layers
Terdiri dari :
Hydraulic Driving Appliance : Steel construction, hydraulic operated 5 Ton
Capacity Single cylinder pressure, sounding speed 2 cm/ sec. incorporated two wheel integral with the driving appliance. Penetration measuring scale 100 cm assembly on body. The standard measuring device is equipped with two pressure gauges. The trailer is suitable for towing behind a truck
Manometer : 60 kg / cm² capacity, lower mount connection.
Manometer : 500 kg / cm² capacity, lower mount connection
Power Unit : Hydraulic pump incorporated in governor matched to the installed petrol engine, 9 HP, hand starter
Sounding Rod : Machined steel, 36 mm o.d., 1 mtr effective length tappered thread
Plunger Rod : Round bar, 15 mm dia, 1 mtr length
Adaptor Consist of : Push Adaptor, Pull Adaptor
Anchoring Pickets : Machined steel, welded, spiral type anchor with screw pickets 1.2 metre length
Hydraulic Spanner : Machined steel, hydraulic gear box powered with variabel speed gasket, additional hand spanner for spare
Mantel Cone : Precision machine steel hardened tip, tappered thread 60º angle, 35.7 mm diameter
Friction Cone : Precision machine steel hardened, with friction jacket tappered thread 60º angle, 35.7 mm diameter
Wrenches Set
Long Fasten Press : Beam cannal, 150 cm length, 12 cm width
Hydraulic Hose : Flexible hose with push/ pull coupler 250 cm length, 10.000 psi capacity
Field Trolley : Fillin sounding apparatus (replacing SO-202A; SO-203A; SO-205A; SO- 219.1; GE-699A)
Standard supply with instruction manual books
Dimension (l x w x h) : 130 x 95 x 210 cm
Gross Weight : 690 kg


Drilling Rig Machine With SPT (Standard Penetration App)

DRILLING RIG MACHINE WITH SPT (Standard Penetration App)This machine a powerful, rugged, and modular drilling machine with unlimited mobility.
It uses a hydraulic system to move the drilling components. Skid Mounted with knock down assembly, is suitable for use on drilling in areas that are difficult to reach. Capable for drilling to a depth of 100 meters

DR-100JC DRILLING RIG (JACRO 100 RIG)

Detail Specification :
– Drilling capacity : 100 metre
– Skid Mounted with knock down assembly
– Hydraulic system, driving rig with gearbox
– Pull up / Down by chain, driven by hydraulic motor
– Driven by Diesel engine 22 HP (Starter)
– Pressure gauge : 160 Kg/ cm2

DR-100PS POWER SPRAYING

Detail Specification :
– Spraying pressure : 50 Kg/cm2
– Speed : 400 – 700 rpm
– Water suction : 76 – 133 L/min
– Powered : diesel engine 12 HP
– Supplied c/w spraying hose 1 inch dia, 15 metre length

DR-100WP WATER PUMP

Detail Specification :
– Spraying pressure : 20 – 30 Kg/cm2
– Speed : 300 – 600 rpm
– Water suction : 22 – 59 L/min
– Powered : diesel engine 10 HP
– Supplied c/w Water hose 3/4 inch dia, 100 metre length

DR-100AC DRILLING ACCESSORIES for 100 Metre Drilling Depth :

Detail Specification :
– DR-100.1AC Drilling Rod : Φ 42 mm x 1.5 metre length
– DR-100.4AC Cassing Pipe (NW) : Φ 89 mm x 3 metre length
– DR-100.7AC Single Core Barrel : Φ 73 mm x 1.5 metre length c/w bit tungsten
– DR-100.8AC Cassing Head (NW): 89 mm diameter x 15 cm
– DR-100.9AC Cassing Bit : 89 mm diameter x 15 cm
– DR-100.10AC Cassing Clamp : 89 mm diameter x 40 cm
– DR-100.23AC Core Bit (NQ) : Diamond core bit, 73 mm diameter
– DR-100.25AC Wing Bit : Tungsten bit, 73 mm diameter

SO-130AC STANDARD PENETRATION TEST

Detail Specification :
– SO-100.17-1 Hammer : Machine steel, 63.5 kg weight, Automatic Drop
– SO-100.17-2 Rod head : Machine steel
– SO-100.17-3 Anvil : Machine steel
– SO-100.17-4 Guide Rod : 42 mm diameter x 1.5 m
– GE-100.26-3 Frame of Tower: 300 cm heigh, heavy duty frame
– Hoisting swivel (AW)

GE-960TK TOOLS KIT

– Pipe wrench 24 inch
– Pipe wrench 36 inch
– Adjustable wrench 8 inch
– Screwdriver + / –
– Tool-box


Dynamic Cone Penetrometer / DCP

DYNAMIC CONE PENETROMETER / DCPFor determination of field CBR value (rapid quality control)
Consist of :
Handle : Stainless steel
Hammer : Machined steel, Painted, 8 kg weight
Guide Rod : Stainless steel, 16 mm diameter, drop height 575 mm
Anvil : Machined steel, welded painted
Penetration Rod : Stainless steel, 16 mm dia, 107 cm length, 75 cm effective
Cone : Hardened tool steel cone tip, 60 deg. angle, 20 mm dia., stainless steel adaptor
Penetration Scale : Stainless steel, 16 mm dia, 100 cm scale
Carrying Bag : Water proof cloth
Open End Wrench : Vanadium steel 12/13, 14/15
Dimension (l x w x h) : 115 x 40 x 40 cm/ Gross weight : 18 Kg
Standard supply with instruction manual books


Plate Bearing Test Set (ASTM D-1194 / AASHTO T-235 )

PLATE BEARING TEST SET (ASTM D-1194 / AASHTO T-235 )For determining ultimate bearing capacity of soil on place by means of field loading test
Consist of :
Hydraulic Jack : 30 tons capacity, manometer read,out, hand oparated
Manometer : 6″ diameter, 30 tons capacity, 0.5 tons,increment
Hydraulic Cylinder : 30 tons capacity
Hydraulic Hand Pump : Double action, 10.000 psi capacity
Hydraulic Hose : 10.000 psi, 180 cm length
Reference Beam : Steel pipe, 2 x 150 cm span
Circular Bearing Plate : 6″ diameter, machined steel, 1″ thick
Circular Bearing Plate : 10″ diameter, machined steel, 1″ thick
Circular Bearing Plate : 12″ diameter, machined steel, 1″ thick
Circular Bearing Plate : 18″ diameter, machined steel, 1″ thick
Circular Bearing Plate : 24″ diameter, machined steel, 1″ thick
Circular Bearing Plate : 30″ diameter, machined steel, 1″ thick
Square Bearing Plate : 12″ x 12″, machined steel, 1″ thick
Dial Indicator : Travel range 30 x readibility 0.01 mm
Dial Holder : Chrome plated shaft with sample clamping device powerfull magnet with on-
Dimension (l x w x h) : 150 x 80 x 80 Cm/ Gross weight : 300 Kg
Standard supply with instruction manual books


Proving Ring Penetrometer

Proving ring penetrometerFor determining penetration resistance of soil layers
Consist of :
Penetration Rod : Round bar, 51.5 cm/49 cm length with 5 cm increment lines.
Penetration Cone : Machine steel, hardened, plated, 1 sq. in cross section area, 30 deg. angle.
Holder : Alumunium handle
Carrying Case : Woodden case
Proving Ring : 100 kg capacity, (Calibration and certified KAN LK-011-IDN)
Open End Wrench : Vanadium steel
Dimension (l x w x h) : 65 x 35 x 20 cm/ Gross weight : 10 kg
Standard supply with instruction manual books


Field CBR Test Set (CBR Lapangan) ASTM D-4429, According SNI 03-1738-1989

Field CBR Test Set (CBR Lapangan) ASTM D-4429, According SNI 03-1738-1989For determining CBR value on place
Consist of :
Mechanical Jack : Cast alumunium housing, 5 tons cap, hand operated, 2 speeds
Swivel head : Cast alumunium
Field Penetration Piston Consist of :
Penetration Piston : Machine steel, galvanized, 1.954″ piston diameter
Extention set : Machined steel, plated, 5 cm, 10 cm, 20 cm, 30 cm, and 60 cm, provided with connecting adaptor
Reference Beam : Steel pipe, 150 cm span include with two stand
Circular Surcharge Weight : Machine steel, plated, 10″ dia, 10 lbs weight
Slotted Surcharge Weight : Machine steel, plated, 8″ dia, 10 lbs weight.
Slotted Surcharge Weight : Machine steel, plated, 8.5″ dia, 20 lbs weight
Proving Ring : 2000 lbs capacity, Calibration & certified KAN LK-011-IDN
Proving Ring : 10,000 lbs capacity, Calibration & certified KAN LK-011-IDN
Dial Indicator : Range 30 x 0.01 mm
Dial Holder : Chrome plated shaft with sample clamping device, powerfull magnet with on-off switch.
Standard supply with :
– Instruction manual books
– Calibration certificate KAN LK-11-IDN
Dimension (l x w x h) : 140 x 35 x 35 cm/ Gross weight : 75 kg


TVA Penetration

TVA penetrationWidely used in analyzing soil surface.
Consist of :
Penetration Rod and Chamber : Steel pipe, 65 cm length with hydraulic chamber
Consist of :
Penetration Rod : Round bar, 40 cm length
Hydraulic Chamber : Machine steel, 100 kg capacity
Penetration Needle : Machine steel, hardened, tip 0.5, 1.0, 2.0, 3.0, sq. Cm
Cross section area
Holder : Alumunium handle
TVA Manometer : 100 kg capacity
Carrying Case : Wooden case
Open End Wrench : Vanadium steel
Dimension (l x w x h) : 65 x 35 x 20 cm/ Gross weight : 10 kg
Standard supply with instruction manual books


Liquid Limit Test Set (Hand Operated) (ASTM D-4318/AASHTO T-89/SNI 03-1967-1990)

LIQUID LIMIT TEST SET (Hand Operated) (ASTM D-4318/AASHTO T-89/SNI 03-1967-1990)For determining liquid limit of soil sample
Consist of :
Liquid Limit Device : Hand Operated, brass cup, hard rubber base, provided with counter
ASTM Grooving Tool : Machine steel, head gauge
Cassagrande Grooving Tool : Brass plate
Thin Box : Alumunium, 60 gr capacity
Glass Plate : Glass 10 mm thick, 30 x 30 cm
Graduated Cylinder : Glass made,100 ml capacity,single numbering
Evaporating Dish : Heat resistance porcelain, 12 cm dia, 250 ml capacity
Spatula : Plastic handle, stainless blade, 150 mm length
Scraper : Plastic handle, stainless blade, 100 mm length
Dimension (l x w x h) : 24 x 26 x 23 cm/ Gross weight : 4 kg
Standard supply with instruction manual books


Liquid Limit Test Set (Electric) (ASTM D-4318/AASHTO T-89/SNI 03-1967-1990)

LIQUID LIMIT TEST SET (Electric) (ASTM D-4318/AASHTO T-89/SNI 03-1967-1990)For determining liquid limit of soil sample
Consist of :
Liquid Limit Device : Electric, 220 V-AC, brass cup, hard rubber base, provided with counter
ASTM Grooving Tool : Machine steel, head gauge
Cassagrande Grooving Tool : Brass plate
Thin Box : Alumunium, 60 gr capacity
Glass Plate : Glass 10 mm thick, 30 x 30 cm
Graduated Cylinder : Glass made,100 ml capacity,single numbering
Evaporating Dish : Heat resistance porcelain, 12 cm dia, 250 ml capacity
Spatula : Plastic handle, stainless blade, 150 mm length
Scraper : Plastic handle, stainless blade, 100 mm length
Dimension (l x w x h) : 40 x 40 x 40 cm/ Gross weight : 7 kg
Standard supply with instruction manual books


Plastic Limit Test Set (ASTM D-4318/AASHTO T-90)

PLASTIC LIMIT TEST SET (ASTM D-4318/AASHTO T-90)For determining plastic limit of soil sample
Consist of :
Plastic Limit Plate : glass made
Consist of :
Reference Rod : Stainless steel rod, 3.2 mm diameter
Glass Plate : Glass 10 mm thick, 30 x 30 cm
Thin Box : Alumunium, 60 gr capacity
Graduated Cylinder : Glass made,100 ml capacity,single numbering
Evaporating Dish : Heat resistance porcelain, 12 cm dia, 250 ml capacity
Spatula : Plastic handle, stainless blade, 150 mm length
Scraper : Plastic handle, stainless blade, 100 mm length
Dimension (l x w x h) : 40 x 40 x 40 cm/ Gross weight : 5 kg
Standard supply with instruction manual books


Shrinkage Limit Test Set (ASTM D-427/AASHTO T-92)

SHRINKAGE LIMIT TEST SET (ASTM D-427/AASHTO T-92)For determining shrinkage limit of soil sample
Consist of :
Prong Plate : 1.6 mm thick hard plastic, 76.2 mm square, 3 stainless steel needles, 0.8 mm dia, 3.2 mm height
Monel Shrinkage Dish : Flat bottom; 44.4 mm i.d, 12.7 mm height approx
Cristalizing Dish : Glass made
Consist of :
Dish : Glass, 57.2 mm i.d, 12.7 mm height approx
Overflow Dish : 9 cm dia approx
Mercury : Bottled
Glass Plate : Glass 10 mm thick, 30 x 30 cm
Thin Box : Alumunium, 60 gr capacity
Graduated Cylinder : Glass made,100 ml capacity,single numbering
Evaporating Dish : Heat resistance porcelain, 12 cm dia, 250 ml capacity
Spatula : Plastic handle, stainless blade, 150 mm length
Scraper : Plastic handle, stainless blade, 100 mm length
Dimension (l x w x h) : 10 x 10 x 30 Cm/ Gross weight : 6 Kg
Standard supply with instruction manual books


Hydrometer Analysis Test Set (ASTM D-422/AASHTO T-88)

HYDROMETER ANALYSIS TEST SET (ASTM D-422/AASHTO T-88)For determining grain size distribution of fine soil sample
Consist of :
Hydrometer A ( 152 H ) : Glass, stream line, range 0 to 60 gr soil/ ltr
Hydrometer B ( 151 H ) : Glass, stream line, range 0.995 to 1.038
Mechanical Stirer : Electric, 220 volt, cast alumunium frame, 10.000 rpm
Dispersion Cup : Stainless steel cup, 3.75″ top diameter, 2.6″ bottom diameter, 7″ height brass baffles
Hydrometer Jar Bath : Steel sheet, fibre glass couted, temperature control
Consist of :
Bath : Steel sheet, fibre glass coated, 60 x 30 x 40 cm
Water Heater : Electric, range ambient to 40°C
Dispension Agent Consist of :
Sodium Hexa : Bottled, powder
Water Glass : Bottled, liquid
Hydrometer Jar : Glass, 1000 ml capacity, 2 1/2″ diameter approx
Graduated Cylinder : 1000 ml capacity, glass made, single numbering
Thermometer : Range 0 to 50°C, glass, alcohol indicator, 30 cm length
Dimension (l x w x h) : 90 x 50 x 50 Cm/ Gross weight : 50 Kg
Standard supply with instruction manual books


Sieve Analysis (Fine Sieves) ASTM E-11

SIEVE ANALYSIS (FINE SIEVES) ASTM E-11For determining grain size distribution of soil particles or sand/gravel
Brass frame 8″ diameter, 70 mm height
Dimension (l x w xh) : 22 x 22 x 6.5
Gross weight : 0.75 Kg
SIEVE 4 : Brass round 8 inch diameter, mesh 4.75 mm opening
SIEVE 8 : Brass round 8 inch diameter, mesh 2.36 mm opening
SIEVE 10 : Brass round 8 inch diameter, mesh 2.00 mm opening
SIEVE 12 : Brass round 8 inch diameter, mesh 1.70 mm opening
SIEVE 16 : Brass round 8 inch diameter, mesh 1.18 mm opening
SIEVE 20 : Brass round 8 inch diameter, mesh 0.850 mm opening
SIEVE 30 : Brass round 8 inch diameter, mesh 0.600 mm opening
SIEVE 40 : Brass round 8 inch diameter, mesh 0.425 mm opening
SIEVE 50 : Brass round 8 inch diameter, mesh 0.300 mm opening
SIEVE 60 : Brass round 8 inch diameter, mesh 0.250 mm opening
SIEVE 70 : Brass round 8 inch diameter, mesh 0.212 mm opening
SIEVE 80 : Brass round 8 inch diameter, mesh 0.180 mm opening
SIEVE 100 : Brass round 8 inch diameter, mesh 0.150 mm opening
SIEVE 120 : Brass round 8 inch diameter,mesh 0.125 mm opening
SIEVE  140 : Brass round 8 inch diameter, mesh 0.106 mm opening
SIEVE 170 : Brass round 8 inch diameter, mesh 0.090 mm opening
SIEVE 200 : Brass round 8 inch diameter, mesh 0.075 mm opening
PAN & COVER : Brass round 8 inch diameter, Receiver with Lid


Sieve Analysis (Coarse Sieves) ASTM E-11

SIEVE ANALYSIS (COARSE SIEVES) ASTM E-11

For determining grain size distribution of soil particles or sand/ gravel
Brass frame 8″ diameter, 70 mm height
Dimension (l x w xh) : 22 x 22 x 6.5
SIEVE 4″ : Brass round 8 inch diameter, mesh 101.6 mm opening
SIEVE 3 1/2″ : Brass round 8 inch diameter, mesh 88.9 mm opening
SIEVE 3″ : Brass round 8 inch diameter, mesh 76.2 mm opening
SIEVE 2 1/2″ : Brass round 8 inch diameter, mesh 62.5 mm opening
SIEVE 2″ : Brass round 8 inch diameter, mesh 50.8 mm opening
SIEVE 1 3/4″ : Brass round 8 inch diameter, mesh 44.4 mm opening
SIEVE 1 1/2″ : Brass round 8 inch diameter, mesh 38.1 mm opening
SIEVE 1 1/4″ : Brass round 8 inch diameter, mesh 31.7 mm opening
SIEVE 1″ : Brass round 8 inch diameter, mesh 25.4 mm opening
SIEVE 7/8″ : Brass round 8 inch diameter, mesh 22.2 mm opening
SIEVE 3/4″ : Brass round 8 inch diameter, mesh 19.0 mm opening
SIEVE 5/8″ : Brass round 8 inch diameter, mesh 15.8 mm opening
SIEVE 1/2″ : Brass round 8 inch diameter, mesh 12.7 mm opening
SIEVE 7/16″ : Brass round 8 inch diameter, mesh 11.1 mm opening
SIEVE 3/8″ : Brass round 8 inch diameter, mesh 9.5 mm opening
SIEVE 5/16″ : Brass round 8 inch diameter, mesh 7.9 mm opening
SIEVE 1/4″ : Brass round 8 inch diameter, mesh 6.3 mm opening
PAN & COVER : Brass round 8 inch diameter, Receiver with Lid


Electric Sieve Shaker Built- in timer 60 minutes

ELECTRIC SIEVE SHAKER Built- in timer 60 minutes

220 V-AC, 1/4 HP, 300 Watt, Steel base, cast alumunium pulley, 8inch sieve diameter, 8 pcs sieve capacity
Built- in timer 60 minutes pulley, 8inch sieve diameter, 8 pcs sieve capacity
Built- in timer, adjustable 60 minutes timer with automatic shutoff
Supplied without lid and receiver (Pan Cover).
Standard supply with instruction manual book
Dimension (l x w x h) : 50 x 50 x 100 cm.
Gross Weight : 50 Kg.


Electric Sieve Shaker Built In Timer 60 minutes

ELECTRIC SIEVE SHAKER Built- in timer 60 minutes220 V-AC, 1/4 HP, 300 Watt, Steel base, cast alumunium pulley, 8inch sieve diameter, 8 pcs sieve capacity
Built- in timer 60 minutes pulley, 8inch sieve diameter, 8 pcs sieve capacity
Built- in timer, adjustable 60 minutes timer with automatic shutoff
Supplied without lid and receiver (Pan Cover).
Standard supply with instruction manual book
Dimension (l x w x h) : 50 x 50 x 100 cm.
Gross Weight : 50 Kg.


Mechanical, Over and Shaker

Mechanical, over and shakerElectric, 220 V/ 50 Hz/ 1 Phase, 50 Rpm.
Supplied complete with 2 glass jar 1000 ml and rubber bungs.
Part / used to Hydrometer analysis test set (SO-330A)
Dimension (l x w x h) : 40 x 60 x 60 cm/ Gross weight : 30 Kg.
Standard supply with instruction manual books


Vacuum Stand (GMM Vacuum Methode)

VACUUM STAND (GMM Vacuum Methode)To facilitate evacuation of air from soil/fine aggregate in flask.
Welded steel frame, vacuum valve, adjustable platen height, provided with vacuum gauge, 0 – 76 cm HG capacity measuring.
Accommodate 6 flasks 500 ml capacity, vacuum type
Supplied complete with vacuum pump and flasks
Dimension (l x w x h) : 120 x 70 x 160 cm/ Gross weight : 80 Kg
Standard supply with instruction manual books


Specific Gravity (Heating Methode) (ASTM D-854/AASHTO T-100)

SPECIFIC GRAVITY (HEATING METHODE) (ASTM D-854/AASHTO T-100)For determining specific gravity of soil sample
Consist of :
Hot Plate : Electric, 1000 Watt, 220 Volt
Asbestos Wire Gauze : Asbestos centre, 15 x 15 cm
Mixing Bow : Stainless steel, round type, 24 cm diameter
Density Bottle : Glass made, 100 ml capacity
Funnel : Glass, wide mouth
Wash Bottle : Plastic, 250 ml capacity
Thermometer : Range 0 to 100°C, glass, alcohol indicator, 30 cm length
Dimension (l x w x h) : 40 x 40 x 40 cm/ Gross weight : 10 Kg
Standard supply with instruction manual books


Specific Gravity & Absorption Of Fine Aggregate Test Set (ASTM C-128/AASHTO T-84)

SPECIFIC GRAVITY & ABSORPTION OF FINE AGGREGATE TEST SET (ASTM C-128/AASHTO T-84)For determining the water absorption of fine aggregate at saturated surface dry
Consist of :
Cone and Tamper :
Consist of :
Cone : Brass, 40 mm i.d at the top 90 mm i.d at the bottom, 75 mm height
Tamper : Machine steel, galvanized, 340 gr weight, 25 mm diameter
Mixing Bowl : Stainless steel, round type, 24 cm diameter
Glass Plate : Glass 10 mm thick, 30 x 30 cm
Volumetric Flask : 500 ml capacity, heat resistance glass
Spatula : Stainless blade, 150 mm length, plastic handle
Dimension (l x w x h): 40 x 40 x 30 cm/ Gross weight: 7 Kg
Standard supply with instruction manual books


Specific Gravity (Vacuum Methode) (ASTM D-854/AASHTO T-100, According SNI 03-6893-2002)

SPECIFIC GRAVITY (VACUUM METHODE) (ASTM D-854/AASHTO T-100, According SNI 03-6893-2002)For determining specific gravity of soil sample
Consist of :
Vacuum Stand : Wooden base, steel pipe column, 2 valves
Mixing Bow : Stainless steel, round type, 250 mm diameter
Graduated Cylinder : Glass made, 500 ml capacity, single numbering
Volumetric Flask : 500 ml capacity, vacuum
Funnel : Glass, wide mouth
Wash Bottle : Plastic, 250 ml capacity
Pipette : Glass, 5 ml capacity
Thermometer : Range 0 to 50°C, glass, alcohol indicator, 30 cm length
Vacuum Manometer : 4 inch diameter., 0 – 76 cm HG capacity measuring
Vacuum Pump : Rotary type, 220 V-AC, 1/2 HP, 1 phase
Dimension (l x w x h) : 70 x 70 x 70 cm/ Gross weight : 45 Kg
Standard supply with instruction manual books


Specific Gravity (Vacuum Methode) (ASTM D-854 /AASHTO T-100, According SNI 03-6893-2002)

SPECIFIC GRAVITY (VACUUM METHODE) (ASTM D-854 /AASHTO T-100, According SNI 03-6893-2002)For determining specific gravity of soil sample
Consist of :
Vacuum Stand : Wooden base, steel pipe column, 2 valves
Mixing Bow : Stainless steel, round type, 250 mm diameter
Graduated Cylinder : Glass made, 500 ml capacity, single numbering
Vacuum Flask : 2000 ml cap, vacuum type, with neck large enough to admit 25 mm aggregate with airtight ground glass stopper
Vacuum Flask : 1000 ml cap, vacuum type, with tabulation for vacuum hose
Funnel : Glass, wide mouth
Wash Bottle : Plastic, 250 ml capacity
Pipette : Glass, 5 ml capacity
Thermometer : Range 0 to 50°C, glass, alcohol indicator, 30 cm length
Vacuum Manometer : 4 inch diameter., 0 – 76 cm HG capacity measuring
Vacuum Pump : Rotary type, 220 V-AC, 1/2 HP, 1 phase
Dimension (l x w x h) : 70 x 70 x 70 cm/ Gross weight : 45 Kg
Standard supply with instruction manual books


Compaction Test Set (ASTM D-698/D-1557; T-99/T-180/SNI-03-1742-1989)

COMPACTION TEST SET (ASTM D-698/D-1557; T-99/T-180/SNI-03-1742-1989)For determining moisture – density relationship
Consist of :
Standard Proctor Mold : Machine steel, plated, 4″ i.d., 4.584″ height, 2″ height of collar
Modified Proctor Mold : Machine steel, plated, 6″ i.d., 4.584″ height, 2″ height of collar
Standard Proctor Hammer : Machine steel, plated, 12″ drop height, 5,5 lbs weight
Modified Proctor Hammer : Machine steel, plated, 18″ drop height, 10 lbs weight
Extruder : Steel frame, hydraulic jack
Square Pan : Galvanized steel 65 x 65 x 7.5 cm
Thin Box : Alumunium, 60 gr capacity
Graduated Cylinder : Plastic made, 1000 ml capacity, single numbering
Scoop : Cast alumunium, large size, round buttom
Trowel : Pointed type, wooden handle
Straight Edge : Galvanized steel, 300 mm length, for leveling samples in molds
Rubber Mallet : Rubber head, 0.5 Kg weight, wooden handle
Steel Wire Brush : Steel wire, wooden handle
Dimension (l x w x h) : 62 x 62 x 40 Cm/ Gross Weight : 120 Kg
Standard supply with instruction manual books


Laboratory CBR Test Set (Electric) (ASTM D-1883/AASHTO T-193; According SNI 03-1744-1989 )

LABORATORY CBR TEST SET (Electric) (ASTM D-1883/AASHTO T-193; According SNI 03-1744-1989 )For determining the bearing ratio of soil
Consist of :
Electrical Loading Machine : Electric, 220 V-AC, 1/2 HP, 1 Phase, speed 0.05″/min reversing switch 10.000 lbs capacity
CBR Mold : Machine steel, 6″ i.d, 7″ height, 2″ height of collar
Spacer Dish : Machine steel, 5 15/16″ diameter, 2.416″ height
Cutting Edge : Machine steel, sharp edge
Circular Surcharge Weight : Machine steel, 5 7/8″ o.d, 2 1/8″ i.d, 5 lbs weight
Slotted Surcharge Weight : machine steel, 5 7/8″ o.d, 2 1/8″ slotted width, 5 lbs weight
Swell plate : Alumunium with adjustable stem
Swell Tripod : Alumunium for mounting sweel dial gauge
Modified Proctor Hammer : machine steel, plated, 2″ dia, 18″ drop height, 10 lbs weight.
Filter Paper : 6 inch diameter., 100 sheets/ box
Proving Ring : 6.000 lbs capacity, Calibration & certified KAN LK-011-IDN
Dial Indicator : Measuring range 0.01″ x 1″
Swell Dial Penetration : Range 30 mm x 0.01 mm
Square Pan : Galvanized steel, 65 x 65 x 7.5 cm
Thin Box : Alumunium, 60 gr capacity
Graduated Cylinder : Plastic made, 1000 ml capacity, single numbering
Scoop : Cast alumunium, large size, round buttom.
Trowel : Pointed type, wooden handle.
Straight Edge : Galvanized steel, 300 mm length, for leveling samples in molds
Dimension (l x w x h) : 110 x 70 x 120 cm/ Gross Weight : 200 Kg
Standard supply with instruction manual books


Laboratory CBR Test Set (Hand Operated) ASTM D-1883 / AASHTO T-193; According SNI 03-1744-1989

LABORATORY CBR TEST SET (Hand Operated) ASTM D-1883 / AASHTO T-193; According SNI 03-1744-1989For determining the bearing ratio of soil.
Mechanical Loading Machine : Steel frame, hand operated, two speed, 10.000 lbs capacity 1.954″ piston diameter
CBR Mold : Machine steel, 6″ i.d, 7″ height, 2″ height of collar
Spacer Dish : Machine steel, 5 15/16″ diameter, 2.416″ height
Cutting Edge : Machine steel, sharp edge
Circular Surcharge Weight : Machine steel, 5 7/8″ o.d, 2 1/8″ i.d, 5 lbs weight
Slotted Surcharge Weight : machine steel, 5 7/8″ o.d, 2 1/8″ slotted width, 5 lbs weight
Swell plate : Alumunium with adjustable stem
Swell Tripod : Alumunium for mounting sweel dial gauge
Modified Proctor Hammer : machine steel, plated, 2″ dia, 18″ drop height, 10 lbs weight
Filter Paper : 6 inch diameter., 100 sheets/ box
Proving Ring : 6.000 lbs capacity, Calibration & certified KAN LK-011-IDN
Dial Indicator : Measuring range 0.01″ x 1″
Swell Dial Penetration : Range 30 mm x 0.01 mm
Square Pan : Galvanized steel, 65 x 65 x 7.5 cm
Thin Box : Alumunium, 60 gr capacity
Graduated Cylinder : Plastic made, 1000 ml capacity, single numbering
Scoop : Cast alumunium, large size, round buttom.
Trowel : Pointed type, wooden handle.
Straight Edge : Galvanized steel, 300 mm length, for leveling samples in molds
Dimension (l x w x h) : 110 x 70 x 70 cm/ Gross weight : 200 Kg
Standard supply with instruction manual books


Combination Permeameter (Constant head & Falling head testing methode) (ASTM D-2434/AASHTO T-215)

COMBINATION PERMEAMETER (Constant head & Falling head testing methode) (ASTM D-2434/AASHTO T-215)For determining coeffisient of permeability of compacted soil sample
Consist of :
Sample Chamber : Transparent fibre glass, 2 1/2″ i.d, 8″ height, compessive spring, cast,alumunium body
Funnel : Plastic, wide mouth, with over flow
Frame : Alumunium frame
Porous Stone : 2 1/2″ diameter
Burette : 50 ml capacity
Graduated Cylinder : Glass made,100 ml capacity,single numbering
Stop Watch : Precision timer, stainless steel body, 60 sec sweep x 30 min
Dimension (l x w x h) : 110 x 40 x 30 cm/ Gross weight : 10 Kg
Standard supply with instruction manual books


Compaction Permeameter Test Set

COMPACTION PERMEAMETER TEST SETFor determining coeffisient of permeability of compacted soil sample.
Consist of :
Compaction Permeameter : 1/30 cu. ft. mold , 4 inch i.d, inlet-outlet connector, overflow valve, porous stone.
Frame : Cast alumunium base, alumunium column, 3 burette (5, 10, 15 mm diameter)
Graduated Cylinder : Glass made,100 ml capacity,single numbering
Stop Watch : Precision timer, stainless steel body, 60 sec sweep x 30 min
Dimension (l x w x h) : 30 x 30 x 50 cm/ Gross weight : 30 Kg
Standard supply with instruction manual books


Compaction Permeameter Test Set

COMPACTION PERMEAMETER TEST SETFor determining coeffisient of permeability of compacted soil sample.
Consist of :
Compaction Permeameter : 1/33.33 cu. ft. mold , 6 inch i.d, inlet-outlet connector, overflow valve, porous stone.
Frame : Cast alumunium base, alumunium column, 3 burette (5, 10, 15 mm diameter)
Graduated Cylinder : Glass made, 100 ml capacity, single numbering
Stop Watch : Precision timer, stainless steel body, 60 sec sweep x 30 min
Dimension (l x w x h) : 30 x 30 x 50 cm/ Gross weight : 30 Kg
Standard supply with instruction manual books


Sand Cone Test Set (ASTM D-1556/AASHTO T-191, According Standard R-SNI 2828 :2008)

SAND CONE TEST SET (ASTM D-1556/AASHTO T-191, According Standard R-SNI 2828 :2008)For determining the density of compacted soil in place
Consist of :
Sand Cone Bottle : Plastic, 4 ltr. capacity. Approx
Sand Cone Funnel : Seamless metal, turning stopper, 6 1/2″ diameter bottom, 1/2 neck diameter
Base Plate : Cast alumunium, 12″ x 12″
Graduated Sand : Uncemented sand, passing # 10, retained # 60, 25 kg cap
Sample Can : Round can, tinned metal
Scoop : Cast alumunium, large size, round buttom.
Spoon : Stainless steel, large size
Trowel : Pointed type, wooden handle
Chisel : Hardened steel, 30 cm length
Rubber Mallet : Rubber head, 0.5 Kg weight, wooden handle
Dimension (l x w x h): 70 x 50 x 50 cm / Gross weight: 50 kg
Standard supply with instruction manual books


Speedy Moisture Tester (c/w Digital Balance) (AASHTO T-217; SNI 03-1965.1-2000)

SPEEDY MOISTURE TESTER (c/w Digital Balance) (AASHTO T-217; SNI 03-1965.1-2000)For determining the moisture content of soil by means of calcium carbide gas pressure meter
Consist of :
Speedy Gauge : M/C range 0-20 %, sens. : 0.2 %, sample weight 20 gr
Speedy Balance : Digital 200 gr capacity x 0.1 gr sensitivity
Calcium Carbide; : Reagent absorbent, CaC₂ calcium carbide
Measuring Spoon : Cast alumunium
Crushing Ball : Steel ball, 31,7 mm diameter
Cleaning Brush : Plastic brush/ plastic holder
Carrying Case : Wooden case with handle
Dimension (l x w x h): 45 x 45 x 30 cm / Gross Weight: 15 Kg
Standard supply with instruction manual books


Moisture Content Test Set

Moisture content test setFor determining moisture content of soil sample
Consist of :
Cent O-Gram Balance :
– 311 gr capacity x 0.01 gr readability
– Front beam : 1g x 0.01g ; second beam : 10g x 1g
– Third beam : 100g x 10g; rear beam : 200g x 100g
Drying Oven :
– 53 litre capacity ; natural air circulation, temperature
– Stainless steel interior (w x h x d) = 400 x 400 x 330 mm
– Stainless steel exterior (w x h x d) = 550 x 680 x 480 mm
– from +30 °C (however, at least 5 °C above ambient) up to +220 °C
– Precission (at 100°C) with mech/electr control = ± 1,0/0,5°C
– Electric load (during heating) approx = 1400 Watt
Thin Box : Alumunium, 60 gr capacity
Dessicator : Transparent glass, 24 cm diameter approx non vacuum type, supplied with
Dimension (l x w x h) : 80 x 80 x 90 Cm/ Gross weight : 70 Kg
Standard supply with instruction manual books


Unconfined Compression Machine (Hand Operated) (ASTM D-2166/AASHTO T-208/SNI 03-3638-1994)

UNCONFINED COMPRESSION MACHINE (Hand Operated) (ASTM D-2166/AASHTO T-208/SNI 03-3638-1994)For determining stress strain relationship of cohessive soil without confining pressure
Consist of :
Unconfined Compression Machine : Cast alumunium, gear box, adjustable height of top platen, hand operated 200 kg capacity
Sample Tubes
Consist of :
Sample Tubes : 35.0 mm dia x 70 mm height
Sample Tubes : 47.5 mm dia x 95 mm height
Sample Tubes : 70.0 mm dia x 140 mm height
Split Sample Tubes :
Consist of :
Split Sample Tubes : 35.0 mm dia x 70 mm height
Split Sample Tubes : 47.5 mm dia x 95 mm height
Split Sample Tubes : 70.0 mm dia x 140 mm height
Sample Extruder :
Extruder : 34.5 mm dia x 71 mm height
Extruder : 47.0 mm dia x 96 mm height
Extruder : 69.5 mm dia x 141 mm height
Trimmer : Steel frame, 3 tubes size
Proving Ring : 100 kg capacity, (Calibration & certified KAN LK-011-IDN)
Dial Indicator : Range 30 mm x 0.01 mm
Thin Box : Alumunium, 60 gr capacity
Wire Saw : 10 cm length approx
Dimension (l x w x h) : 80 x 40 x 40 cm/ Gross weight : 50 Kg
Standard supply with instruction manual books


Unconfined Compression Machine (Electric) (ASTM D-2166/AASHTO T-208/SNI   03-3638-1994)

UNCONFINED COMPRESSION MACHINE (Electric) (ASTM D-2166/AASHTO T-208/SNI 03-3638-1994)For determining stress strain relationship of cohessive soil without confining pressure
Consist of :
Unconfined Compression Machine : Electric, 220V-AC, 200 W, variable speed, adjustable height
Sample Tubes
Consist of :
Sample Tubes : 35.0 mm dia x 70 mm height
Sample Tubes : 47.5 mm dia x 95 mm height
Sample Tubes : 70.0 mm dia x 140 mm height
Split Sample Tubes :
Consist of :
Split Sample Tubes : 35.0 mm dia x 70 mm height
Split Sample Tubes : 47.5 mm dia x 95 mm height
Split Sample Tubes : 70.0 mm dia x 140 mm height
Sample Extruder :
Extruder : 34.5 mm dia x 71 mm height
Extruder : 47.0 mm dia x 96 mm height
Extruder : 69.5 mm dia x 141 mm height
Trimmer : Steel frame, 3 tubes size
Proving Ring : 100 kg capacity, (Calibration & certified KAN LK-011-IDN)
Dial Indicator : Range 30 mm x 0.01 mm
Thin Box : Alumunium, 60 gr capacity
Wire Saw : 10 cm length approx
Dimension (l x w x h) : 80 x 40 x 40 cm/ Gross weight : 60 Kg
Standard supply with instruction manual books


Consolidation Test Set (ASTM D-2435/AASHTO T-216)

CONSOLIDATION TEST SET (ASTM D-2435/AASHTO T-216)For determining the rate and magnitude of consolidation of soil when it is restrained laterally, loaded and drained axially
Consist of :
Consolidation Frame
Consist of :
Frame : Cast alumunium, two test unit
Loading set : Three alternative lever arm 1:9, 1:10, 1:11
Consolidometer : Brass, 50.5 mm sample dia., porous stone,loading capacity.
Loads :
Consist of :
Loads : 500 gr weight
Loads : 1000 gr weight
Loads : 2000 gr weight
Loads : 4000 gr weight
Loads : 4000 gr weight
Sample Tube : Machine steel, 50.5 mm dia.galvanized, with extruder
Dial Indicator : Range 10 mm x 0.01 mm
Wire Saw : 10 cm length approx
Dimension (l x w x h) : 80 x 80 x 150 cm/ Gross weight : 130 Kg
Standard supply with instruction manual books


Direct Shear Test Set (Hand Operated) (ASTM D-3080/AASHTO T-236)

DIRECT SHEAR TEST SET (Hand Operated) (ASTM D-3080/AASHTO T-236)For determining shearing resistance of soil sample
Consist of :
Loading Machine
Consist of :
Frame : Welded steel frame, hand operated gear box, 100 kg cap
Loading Hanger : Machine steel, galvanized, supplied without load
Shear Box : Cast alumunium box, 63.5 mm sample diameter, porous stone, loading capacity.
Loads : Slotted, machine steel, galvanized
Consist of :
Load : 3167 gr weight
Load : 6334 gr weight
Sample Tube : Machine steel, 63.5 mm diameter, galvanized, with extruder
Proving Ring : 100 kg capacity (Calibration & certified KAN LK-011-IDN)
Dial Indicator : Range 10mm x 0.01mm
Dial Indicator : Range 20mm x 0.01mm
Wire Saw : 10 cm length approx
Dimension (l x w x h) : 130 x 20 x 130 cm/ Gross Weight : 125 Kg
Standard supply with instruction manual books


Electric Direct Shear Test Set (ASTM D-3080/AASHTO T-236)

ELECTRIC DIRECT SHEAR TEST SET (ASTM D-3080/AASHTO T-236)For determining shearing resistance of soil sample
Consist of :
Loading Machine
Consist of :
Electric shear Machine : Welded steel frame, electric 220V, 200 Watt, 50, Hz 25 speed gear box 0.00 to 1.2 mm/ minute
Loading Hanger : Machine steel, galvanized, supplied, without load
Shear Box : Cast alumunium box, 63.5 mm sample diameter, porous stone, loading capacity
Loads : Slotted, machine steel, galvanized
Consist of :
Load : 3167 gr weight
Load : 6334 gr weight
Sample Tube : Machine steel, 63.5 mm diameter, galvanized, with extruder
Proving Ring : 100 kg capacity (Calibration & certified KAN LK-011-IDN)
Dial Indicator : Range 10mm x 0.01mm
Dial Indicator : Range 20mm x 0.01mm
Wire Saw : 10 cm length approx
Dimension (l x w x h) : 130 x 25 x 130 cm/ Gross Weight : 125 Kg
Standard supply with instruction manual books


Triaxial Test Set ASTM D-2850

TRIAXIAL TEST SET ASTM D-2850The triaxial test set provides test load up to 300 kgf at any speed from 0.00 to 3.00 per minutes. This features provides the capability for use in application such as constant rate of load and constant rate of stress.
The unit incorporates :
Triaxial Compression Machine : CD or UU & CU, capacity 300 kgf, loading speed 0.00 to
3.00 mm per minute, cell (speciment) size 35mm and 50mm maximum, Control power on- off switch, fast advanced selector swith. Variable speed, hand-operated and motorized operated with electric consumption 220V AC/ 200 W
Load Measuring : Load ring 300 kgf capacity, Calibration & certified KAN LK-011-IDN
Displacement Measuring : dial gauge 30 mm x 0,01mm
Panel Control Consist of :
Measuring Pore Pressure : 10 Kg/Cm (Digital reading for pore pressure value)
Measuring Cell Pressure : 10 Kg/Cm (Manometer), Calibration & certified KAN LK-011-IDN
Measuring Back Pressure : 10 Kg/Cm (Manometer), Calibration & certified KAN LK-011-IDN
Burrete : for measuring pore pressure
Top Water Tank : plastic, 3 litre capacity
Buttom Water Tank : stainless steel, 5 litre capacity
Vacuum Tank : Stainless steel tank
Triaxial Cells (Cell Chamber) Consist of :
Chamber : Made of non corrosive material and acrylic transparant.
Sample Pad : for 35 mm diameter specimen
Sample Pad : for 50 mm diameter specimen
Constant Pressure Consist of :
Air Regulator : for cell pressure
Air Regulator : for back pressure
Compressor Unit : compressor pump 0-10 Kg/ cm
Vacuum Unit : vacuum pump 0-70 cm Hg, rotary type, 220 V-AC, 1/2 HP, 1 Phase
Placing Tool : O-ring, 50 mm diameter
Placing Tool : O-ring, 35 mm diameter
Suction Membrane Device : stainless steel, 50 mm diameter
Suction Membrane Device : stainless steel, 35 mm diameter
Two Ways Split Former : 50 mm diameter
Two Ways Split Former : 35 mm diameter
Sample Tube : stainless steel tube, 50 mm diameter
Sample Tube : stainless steel tube, 35 mm diameter
Membrane : rubber, 50 mm diameter
Membrane : rubber, 35 mm diameter
Membrane Sealing Ring : ring rubber, 50 mm diameter
Membrane Sealing Ring : ring rubber, 35 mm diameter
Overall dimension : 200 x 80 x 180 cm/ Gross weight : 195 Kg
Standard supply with instruction manual books

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *