Home » Peralatan Laboratorium Teknik Sipil (Page 2)

Category Archives: Peralatan Laboratorium Teknik Sipil

Sample Extruder

Sample extruderFor extruding soil speciment from 68 mm dia sampling tube (hand boring part SO- 117), welded steel, screw type.
Supplied without sampling tube.
Standard supply with instruction manual operating
Dimension (l x w x h) : 125 x 15 x 25 Cm
Gross weight : 45 Kg

Standard Penetration Test

Standard penetration testASTM D-1586 /  AASHTO T-206
For driving a split barrel sampler to obtain a representative soil sample and measure the soil resistance to penetration.
Consist of :
Split Barrel Sampler : Hardened machined steel, 1 3/8″ I.d; 18″ length
Sampling Rod : Steel pipe, 44 mm (1 3/4″) diameter, 1.5 m length
Drive weight Assembly Consist of :
Hammer : Steel, 63.5 kg weight, 8″ diameter, 240 mm height
Anvil : Machine steel, 6″ diameter, 150 mm height
Guide Rod : Steel, 76.2 cm drop height
Tripod Assembly Consist of :
Tripod Stand : Steel pipe 71 mm dia # 2.5 mm, 6 metre standing
Pulley : 20 cm diameter
Rope : Manila rope, 3/4 diameter x 15 metre
Vertical Guide : Machine steel, 160 mm dia, 45 mm hole dia
Pipe Wrench : 24” length
Dimension (l x w x h) : 330 x 60 x 60 Cm/ Gross weight : 445 Kg

Electric Sample Extruder

Electric sample extruderFor extruding soil speciment from 68 mm dia sampling tube (hand boring part SO- 117), electric, 220 Volt, 750 Watt, 1 Phase.

Supplied without sampling tube
Standard supply with instruction manual operating
Dimension (l x w x h) : 40x50x130 Cm
Gross weight : 60 Kg

Corps of Engineer Soil Surface Sampler (ASTM D-2937)

Corps of Engineer Soil Surface Sampler (ASTM D-2937)For determining soil density in place
Consist of :

Hammer :
– Machine steel, plated, 10 lbs
– sliding weight : 27 1/4″ falling height

Sampling Tube :
– Machine steel, plated, 3″ o.d,
– 2-7/8″ i.d., 2-13/16″ length
– Standard supply with instruction manual operating
– Dimension(l x w x h) :25x25x100 cm
– Gross Weight : 35 kg

Dutch Cone Penetrometer/ Sondir 5 Ton Capacity (ASTM D-3441 / SNI 2827-2008)

DUTCH CONE PENETROMETER / Sondir 5 Ton Capacity (ASTM D-3441 / SNI 2827-2008)For determining cone resistance and friction resistance of soil layers
Consist of :

Press-In Apparatus : Steel construction, manually operated 5 tons capacity.
Sounding Rod : Machined steel, 36 mm o.d., 1 mtr effective length, tappered thread.
Plunger Rod : Round bar, 15 mm dia, 1 mtr length
Adaptor :
Push Adaptor Machined steel.
Pull Adaptor Machined steel.
Spiral Anchor
Spiral Anchor : Machined steel, welded 1.5 m length
Handle And T-piece : Machined steel, welded
Mantel Cone : Precision machine steel hardened tip, tappered thread 60º angle, 35.7 mm diameter
Friction Cone : Precision machine steel hardened, with friction jacket, tappered thread 60º angle, 35.7 mm diameter.
Wrenches Set : Pipe wrench (2), adjustable wrench (1), spanner wrench (1) 1 set allen key (1), screw driver (1), oil can (1), steel brush (1), piston wrench (1), seals tape (2), oil seals
(2), steel box (1).
Fasten press Long Fasten Press Short Fasten Press
Manometer
Fasten press : Beam Cannal
Long Fasten Press : 1.8 m length, 12 cm width
Short Fasten Press : 1.2 m length, 15 cm width
Manometer : 60 kg/ cm² cap, single pointer, 6″ dia, lower mount connection (Calibration and certified KAN LK-011-IDN)
Manometer : 500 kg/ cm² cap, single pointer, 6″ dia, lower mount connection (Calibration and certified KAN LK-011-IDN)
Dimension (l x w x h): 220 x 120 x 80 cm/ Gross weight: 500 kgStandard supply with instruction manual books

Hydraulic Cone Penetrometer / Sondir Hidrolik 5 Ton Capacity

HYDRAULIC CONE PENETROMETER / Sondir Hidrolik 5 Ton CapacityASTM D-3441 / SNI 2827-2008
For determining cone resistance and friction resistance of soil layers
Terdiri dari :
Hydraulic Driving Appliance : Steel construction, hydraulic operated 5 Ton Capacity Single cylinder pressure, sounding speed 2 cm/ sec. incorporated two wheel integral with the driving appliance. Penetration measuring scale 100 cm assembly on body. The standard measuring device is equipped with two pressure gauges. The trailer is suitable for towing behind a truck
Manometer : 60 kg / cm² capacity, lower mount connection.
Manometer : 500 kg / cm² capacity, lower mount connection
Power Unit : Hydraulic pump incorporated in governor matched to the installed petrol engine, 9 HP, hand starter
Sounding Rod : Machined steel, 36 mm o.d., 1 mtr effective length tappered thread
Plunger Rod : Round bar, 15 mm dia, 1 mtr length
Adaptor Consist of : Push Adaptor, Pull Adaptor
Anchoring Pickets : Machined steel, welded, spiral type anchor with screw pickets 1.2 metre length
Hydraulic Spanner : Machined steel, hydraulic gear box powered with variabel speed gasket, additional hand spanner for spare
Mantel Cone : Precision machine steel hardened tip, tappered thread 60º angle, 35.7 mm diameter
Friction Cone : Precision machine steel hardened, with friction jacket tappered thread 60º angle, 35.7 mm diameter
Wrenches Set
Long Fasten Press : Beam cannal, 150 cm length, 12 cm width
Hydraulic Hose : Flexible hose with push/ pull coupler 250 cm length, 10.000 psi capacity
Field Trolley : Fillin sounding apparatus (replacing SO-202A; SO-203A; SO-205A; SO- 219.1; GE-699A)
Standard supply with instruction manual books
Dimension (l x w x h) : 130 x 95 x 210 cm
Gross Weight : 690 kg

Drilling Rig Machine With SPT (Standard Penetration App)

DRILLING RIG MACHINE WITH SPT (Standard Penetration App)This machine a powerful, rugged, and modular drilling machine with unlimited mobility.
It uses a hydraulic system to move the drilling components. Skid Mounted with knock down assembly, is suitable for use on drilling in areas that are difficult to reach. Capable for drilling to a depth of 100 meters

DR-100JC DRILLING RIG (JACRO 100 RIG)

Detail Specification :
– Drilling capacity : 100 metre
– Skid Mounted with knock down assembly
– Hydraulic system, driving rig with gearbox
– Pull up / Down by chain, driven by hydraulic motor
– Driven by Diesel engine 22 HP (Starter)
– Pressure gauge : 160 Kg/ cm2

DR-100PS POWER SPRAYING

Detail Specification :
– Spraying pressure : 50 Kg/cm2
– Speed : 400 – 700 rpm
– Water suction : 76 – 133 L/min
– Powered : diesel engine 12 HP
– Supplied c/w spraying hose 1 inch dia, 15 metre length

DR-100WP WATER PUMP

Detail Specification :
– Spraying pressure : 20 – 30 Kg/cm2
– Speed : 300 – 600 rpm
– Water suction : 22 – 59 L/min
– Powered : diesel engine 10 HP
– Supplied c/w Water hose 3/4 inch dia, 100 metre length

DR-100AC DRILLING ACCESSORIES for 100 Metre Drilling Depth :

Detail Specification :
– DR-100.1AC Drilling Rod : Φ 42 mm x 1.5 metre length
– DR-100.4AC Cassing Pipe (NW) : Φ 89 mm x 3 metre length
– DR-100.7AC Single Core Barrel : Φ 73 mm x 1.5 metre length c/w bit tungsten
– DR-100.8AC Cassing Head (NW): 89 mm diameter x 15 cm
– DR-100.9AC Cassing Bit : 89 mm diameter x 15 cm
– DR-100.10AC Cassing Clamp : 89 mm diameter x 40 cm
– DR-100.23AC Core Bit (NQ) : Diamond core bit, 73 mm diameter
– DR-100.25AC Wing Bit : Tungsten bit, 73 mm diameter

SO-130AC STANDARD PENETRATION TEST

Detail Specification :
– SO-100.17-1 Hammer : Machine steel, 63.5 kg weight, Automatic Drop
– SO-100.17-2 Rod head : Machine steel
– SO-100.17-3 Anvil : Machine steel
– SO-100.17-4 Guide Rod : 42 mm diameter x 1.5 m
– GE-100.26-3 Frame of Tower: 300 cm heigh, heavy duty frame
– Hoisting swivel (AW)

GE-960TK TOOLS KIT

– Pipe wrench 24 inch
– Pipe wrench 36 inch
– Adjustable wrench 8 inch
– Screwdriver + / –
– Tool-box

Dynamic Cone Penetrometer / DCP

DYNAMIC CONE PENETROMETER / DCPFor determination of field CBR value (rapid quality control)
Consist of :
Handle : Stainless steel
Hammer : Machined steel, Painted, 8 kg weight
Guide Rod : Stainless steel, 16 mm diameter, drop height 575 mm
Anvil : Machined steel, welded painted
Penetration Rod : Stainless steel, 16 mm dia, 107 cm length, 75 cm effective
Cone : Hardened tool steel cone tip, 60 deg. angle, 20 mm dia., stainless steel adaptor
Penetration Scale : Stainless steel, 16 mm dia, 100 cm scale
Carrying Bag : Water proof cloth
Open End Wrench : Vanadium steel 12/13, 14/15
Dimension (l x w x h) : 115 x 40 x 40 cm/ Gross weight : 18 Kg
Standard supply with instruction manual books


Plate Bearing Test Set (ASTM D-1194 / AASHTO T-235 )

PLATE BEARING TEST SET (ASTM D-1194 / AASHTO T-235 )For determining ultimate bearing capacity of soil on place by means of field loading test
Consist of :
Hydraulic Jack : 30 tons capacity, manometer read,out, hand oparated
Manometer : 6″ diameter, 30 tons capacity, 0.5 tons,increment
Hydraulic Cylinder : 30 tons capacity
Hydraulic Hand Pump : Double action, 10.000 psi capacity
Hydraulic Hose : 10.000 psi, 180 cm length
Reference Beam : Steel pipe, 2 x 150 cm span
Circular Bearing Plate : 6″ diameter, machined steel, 1″ thick
Circular Bearing Plate : 10″ diameter, machined steel, 1″ thick
Circular Bearing Plate : 12″ diameter, machined steel, 1″ thick
Circular Bearing Plate : 18″ diameter, machined steel, 1″ thick
Circular Bearing Plate : 24″ diameter, machined steel, 1″ thick
Circular Bearing Plate : 30″ diameter, machined steel, 1″ thick
Square Bearing Plate : 12″ x 12″, machined steel, 1″ thick
Dial Indicator : Travel range 30 x readibility 0.01 mm
Dial Holder : Chrome plated shaft with sample clamping device powerfull magnet with on-
Dimension (l x w x h) : 150 x 80 x 80 Cm/ Gross weight : 300 Kg
Standard supply with instruction manual books